OPPORTUNITIES

Required Skills

• Embedded software development for various products.
• Bug fixes for any issues identified during filed deployment.
• Team Guidance and deliverable reviews.

• BE/Btech/ graduation degree in Electronics/Electrical/Telecommunication.
• Solid programming experience in C. Experience in C++ is an added advantage.
• Familiarity with software configuration management tools (Git), defect tracking tools, (CCS/Keil, JTAG tools) and peer review.
• Excellent SW optimization skills in terms of CPU performance and memory space.
• Excellent Diagnostic SW development for the system and debugging skills.
• Adequate knowledge of reading schematics and data sheets for components.
• Strong knowledge on peripheral initialization and configuration; Flash, RAM, Boot loader,
• Interrupt Vector, Watchdog, Clock, GPIO, PWM, Timer, ECAP, UART, SPI
• Excellent knowledge of IP protocols, interfaces and hardware subsystems
• Knowledge of SoC hardware architecture; Processors, buses, IRQ, DMA, UART, USB, I2C, SPI, RS232, RS485, CAN, LIN.
• Knowledge of GSM, GPRS, Bluetooth, Zigbee, Wi-Fi wireless Protocols and software development on embedded platform.
• Experience in writing the software requirement and design documents.
• Must have good knowledge in testing the software based on the requirements and prepare the test case & test report documents.
• Must engage in continuous status call with project stake holders during the project tenure.
• Good team player with communication skills.

Roles and Responsibilities

• Embedded software development for various products.
• Bug fixes for any issues identified during filed deployment.
• Team Guidance and deliverable reviews.

Required Skills

• Embedded Software Architecture design for various products.
• Embedded software development for various products.
• Bug fixes for any issues identified during filed deployment.
• Leading and training the team members.
• Team Guidance and deliverable reviews.
• Aligning to organization expectations by working on innovative ideas.

• BE/Btech/ graduation degree in Electronics/Electrical/Telecommunication.
• Solid programming experience in C. Experience in C++ is an added advantage.
• Strong knowledge of Microcontroller architecture.
• Familiarity with software configuration management tools (Git), defect tracking tools, (CCS/Keil, JTAG tools) and peer review.
• Excellent SW optimization skills in terms of CPU performance and memory space.
• Excellent Diagnostic SW development for the system and debugging skills.
• Understand and follow V-Model SDLC process.
• Having good understanding on the Automotive and IoT features.
• Adequate knowledge of reading schematics and data sheets for components.
• Strong knowledge on peripheral initialization and configuration; Flash, RAM, Boot loader,
• Interrupt Vector, Watchdog, Clock, GPIO, PWM, Timer, ECAP, UART, SPI
• Excellent knowledge of IP protocols, interfaces and hardware subsystems
• Knowledge of SoC hardware architecture; Processors, buses, IRQ, DMA, UART, USB, I2C, SPI, RS232, RS485, CAN, LIN.
• Knowledge of GSM, GPRS, Bluetooth, Zigbee, Wi-Fi wireless Protocols and software development on embedded platform.
• Experience in writing the software requirement and design documents.
• Must have good knowledge in testing the software based on the requirements and prepare the test case & test report documents.
• Engage in regular status call and technical discussion with customers during the project tenure.

Roles and Responsibilities

• Embedded Software Architecture design for various products.
• Embedded software development for various products.
• Bug fixes for any issues identified during filed deployment.
• Leading and training the team members.
• Team Guidance and deliverable reviews.
• Aligning to organization expectations by working on innovative ideas.

Required Skills

• Designing motor control algorithms.
• Embedded C Coding, validating and debugging where changes to software are required.
• Documentation of coding and validation.
• Knowledge in CAN & Serial Communication.
• Preferable experience in RTOS and MATLAB/Simulink modelling.
• Providing support to the development team for all aspects of motor control.
• Ensuring that Motor Control development follows the company processes and quality procedures.
• Supervision and guidance of junior engineers and technicians.
• Must have knowledge of Various motor technologies including some or all of the motor – BLDC motors, PMSM, Induction Motors, Switched reluctance Motors.
• Work experience in Control methods including some or all of the following: Vector control, Sensor less control, Scalar control, Field weakening, Scalar control.
• Failure analysis of Motor/Controller
• Preparation of technical documents required for motor/controller, on selecting the right motor based on the motor Power/Torque curves.
• Integration of the Motor and the Motor Controller at a vehicle level and ensure that vehicle level performance requirements are met.
• Must be a team player and be able to work alone with minimum guidance.
• Able to deliver project on time.

Required Skills

• Experience in Hardware Product Design
• Experience in High-Speed Digital, Analog and Mixed-signal board design.
• Experience in end-to-end hardware product design & development involving Requirements Analysis, Architecture Design, Components selection, Power Budgeting, Circuit Design, Schematic Capture, PCB Design Guidance, Board Bringup, Integration Testing, DVT, Proto Evaluation, Compliance Certification, Technical Support, etc.
• Exposure to design tools (Altium, Allegro, Orcad, PADS, etc.), simulation tools (TINA, LTspice, HyperLynx, etc.)
• Manage mechanical design support (Solidworks/ProE/eDRawings,etc.)
• Good Capability at Schematics analysis and Reviews, PCB Stackup & Routing Strategy definition, PCB Layout placement and Routing Reviews, Power supply layout Reviews, High speed board design Reviews & Gerber Reviews, DFM/DFT, etc.
• Good Hardware debugging, board bring-up, testing & design validation experience.
• Technical Documentation (such as compiling hardware requirements, hardware design documents, test protocols and reports, etc.)
• Knowledge in Design Analysis for Signal integrity, power/thermal integrity, EMI/EMC, FMEA, Safety & Reliability, etc..
• Experience in Processor/SOC based designs.
• Knowledge on Communication Protocols like CAN, LIN, RS232, RS485, I2C, SPI, QSPI, SDIO, USB, Ethernet, GSM, WiFi, BLE, Zigbee, etc.
• Experience in High-speed interfaces such as DDR2/3/4, PCIe, USB, HDMI, MIPI, CSI, LVDS, SERDES interfaces etc.
• Experience in Power Management devices, Linear & Switched Mode power supplies & Battery operated product designs.
• Experience in the usage of measurement tools and equipments – DMM, DSO, Signal Generators, Spectrum Analyzers, Logic Analyzers, Data Analyzers, etc.
• Project management – Effort Estimation, Project Tracking & Managing Project Schedules, Project Budgeting & Deliverable
• Technical understanding of projects, generating technical proposals, BoM costing & optimization.
• Hardware Project Lead interfacing with cross-functional teams – firmware, application, mechanical, etc.
• Good communication skills. Experience in Vendor & Client interactions.
• Good planning & organizing skills
• Good analytical & problem solving skills
• Initiative, Responsible and Eagerness to learn & explore to upskill
• Good team player
• Experience in Building, Mentoring, Monitoring & Managing the team.

Required Skills

• Hands-on experience in Analog, Digital & Mixed Signal circuit design.
• Hands-on in design tools (Altium, Allegro, Orcad, PADS, etc.), simulation tools (TINA, LTspice, HyperLynx, etc.)
• Experience in Board bringup testing and debugging, DVT.
• Experience in Soldering/Desoldering for changing components on need.
• Experience in 8/16/32 bit Micro-controller, Processor & SoC based circuit design
• Good understanding of Linear/ Switch Mode Power Supplies and Battery operated devices
• Good understanding of Communication Protocols like CAN, LIN, RS232, RS485, I2C, SPI, QSPI, SDIO, USB, Ethernet, etc.
• Hands-on experience in the usage of measurement tools and equipments –  DMM, DSO, Signal Generators, Spectrum Analyzers, Logic Analyzers, Data Analyzers, etc
• Understanding of PCB design guidelines, Capability to do design reviews (Schematics, PCB & Gerbers) would be preferred
• FMEA & EMI/ EMC testing experience would be an added advantage
• Project management – Effort Estimation, Project Tracking & Managing Project Schedules, Project Budgeting & Deliverable
• Technical understanding of projects, generating technical proposals, BoM costing & optimization.
• Interfacing with cross-functional teams – firmware, application, mechanical, etc.
• Good planning & organizing skills
• Good analytical & problem solving skills
• Initiative, Responsible and Eagerness to learn & explore to upskill
• Good team player
• Initiative in Building, Mentoring, Monitoring & Managing the team